Method of installation of wall used artificial grass

With the gradual development of social economy and the acceleration of the pace of urban life, our requirements for the living environment are also gradually increasing, the coverage of the green area is becoming larger and larger, the wall used Artificial Grass is also using the artificial lawn to do decoration, the existence of the wall used artificial grass also greatly improve the appearance of the city, both practical and beautiful.

For the installation method of the artificial grass, we can also do some general understanding.

1. Auxiliary tools must be prepared in advance before installation: long ruler, wallpaper knife, Artificial Turf special glue, brush, rubber hammer, dragon skeleton, electric drill, nails, etc.;

2. Before the construction of artificial lawn, first of all need to glue artificial lawn ground or wall clean clean, and maintain the appearance of dry water, artificial lawn construction connection process, also need to choose the environment temperature above 5℃ is the most appropriate artificial lawn construction; The lawn is spread out for 24 hours to release the surface tension of the lawn, resulting in the actual effect of lawn paving without wrinkles, better looking;

3. Stabilize the dragon skeleton on the outer wall first. The dragon skeleton close to the outer wall with the brush in the must nail position to draw a small circle, in the small circle with the electric drill drilling nails, the dragon skeleton firmly on the outer wall;

4. According to the height of the outer wall, cut the lawn into necessary specifications with wallpaper knife, nail it on the keel frame, brush glue on the corner edge of the lawn to prevent cracking. Artificial turf brush glue important link should control the drying time. Usually, within 10-30 minutes after gluing, the glue paste is 90% dry, and non-stick touch is the standard. Artificial turf construction bonding requires a one-time look at the adhesive, do not move after the bonding object;

5. Curing in the important link of the actual construction of artificial turf: During the construction of artificial turf, the curing time is usually three days, and the strength is usually ten days after detection. In the artificial turf construction and curing stage should pay attention to the regular maintenance of artificial turf, artificial turf to prevent flooding and moving, so as to make the artificial lawn adhesion in the best state.

In the important link of artificial lawn wall installation, the difference from other installation is that the dragon skeleton must be supported, which is also a very important link in the external wall installation, only in this way can be more solid stable lawn.